GreenClean PRO Specimen Label

1.0 lb. of GreenCleanPRO = 11 Scoops

1.0 Tbs. of GreenCleanPRO = 1/3 Scoop

1.0 tsp. of GreenCleanPRO = 1/10 Scoop

FOR STOCK TANKS AND LIVESTOCK WATER:

Use GreenCleanPRO to suppress / control algae, bacteria and fungi in stock tanks, stock watering ponds, tanks and troughs, and livestock water. Apply 2 to 10 tablespoons per thousand gallons of water. Product can be simply added to the body of water, for even distribution throughout the water column. Apply GreenCleanPRO as needed to control and prevent algae growth; make applications more frequently in times of higher water temperatures.

FOR AGRICULTURAL SPRAY IRRIGATION WATER, IRRIGATION PONDS, DRAINAGE WATER AND DITCHES:

Use GreenCleanPRO to suppress/control algae, bacteria and fungi in agricultural irrigation waters, irrigation ponds and drainage water and ditches. Apply 2 to 10 tablespoons per thousand gallons of water. Product can be simply added to the body of water, for even distribution throughout the water column.

FOR SEWAGE WATER TREATMENT:

Use GreenCleanPRO for the control of bacteria and malodors caused by hydrogen sulfide gas. Apply

One pound of granules is equivalent to one pound of tablets.

50-250 lbs. of GreenCleanPRO per million gallons of water. For lagoons, wait 24 hours before adding beneficial bacteria.

FOR ALGAE CONTROL IN RICE/ WILD RICE FIELDS AND PADDIES:

After the field has been flooded to a depth of 4-6 inches, apply 10-25 lbs. of GreenCleanPRO per acre as a broadcast or aerial spread by plane or other professional device at the first signs of algae. Applications are most effective when made before algae rises to the water surface. Reapply as needed in accordance with General Treatment Notes.

DETERMINING WATER VOLUME

Measure length (L), width (W), and average depth

(D) in feet (ft) or meters (m) and calculate volume using one of the following formulas:

Square/Rectangular: L(ft) x W(ft) x D(ft) x 7.5 = Gallons L(m) x W(m) x D(m) x 1000 = Liters

Circular/Elliptical:

L(ft) x W(ft) x D(ft) x 5.9 = Gallons

L(m) x W(m) x D(m) x 786 = Liters

1 acre-foot of water =

• water measuring 208.7 ft long x 208.7 ft

wide x 1 ft deep

• 43,560 cubic feet
• 325,851 gallons
• 2,780,000 pounds

Avg. Length (ft) x Avg. Width (ft) x Avg. Depth (ft)

43,560 = acre-feet of water

Avg. Length (ft) x Avg. Width (ft)= acres 43,560

	HEAVY ALGAE GROWTH	LOW ALGAE GROWTH / MAINTENANCE
GRANULAR/ TABLETS: Lg. Volume	50-300 pounds of GreenCleanPRO per million gallons of water. – or 20-100 pounds of GreenCleanPRO per acre-foot of water	5-30 pounds of GreenCleanPRO per million gallons of water. – or 2-10 pounds of GreenCleanPRO per acre-foot of water.
For example: Lakes, ponds, lagoons
GRANULAR/ TABLETS: Sm. Volume	2-10 tablespoons of GreenCleanPRO per 1,000 gallons of water.	1-3 teaspoons of GreenCleanPRO per 1,000 gallons of water.
	(16 Tbs. = 1 Cup) (2 Cups = 1 lb.)	(3 tsp. = 1 Tbs.)
For example: Indoor or outdoor water gardens, fountains, ornamental waterfalls

2

GENERAL TREATMENT NOTES contact of the pesticide is made with the algae. -Liquid applications will not sink through the

– Control is most easily achieved when algae are water column as readily as a granular/tablet not yet well established. Treat when growth first application.

begins to appear. This is especially important

– When treating surface mats and blooms, it is in the prevention of clogged irrigation systems, possible that GreenCleanPRO will not penetrate pumps, filters etc.

the water column below the infested area, and

– Apply early in the day under calm, sunny condia second application is then required for treating tions, and when water temperatures are warm.

any bottom growing algae.

Sunlight and higher temperatures both enhance

– Apply more often during the summer months when GreenCleanPRO activity.

water consumption and temperatures are high.

-Apply in a manner that will insure even distribution of GreenCleanPRO within the treatment area. APPLICATION METHODS

– Break up any heavy floating algae mats before or during application. In bodies of water where an aerator is available,

– Skim any dead algae and organic matter that rises and when treating an entire water volume, apply to the water’s surface after treatment. Allowing GreenCleanPRO at the edges of the aerator turbudead organics to sink and decay will provide a lence, or within the turbulence created by running food source and additional nutrients that stimulate the aerator to facilitate rapid and adequate mixing. algae re-growth and further blooms.

– If using in conjunction with other water additives SPREADING / BROADCASTING: (such as bacteria or enzymes), always apply Broadcast GreenCleanPRO with a mechanical GreenCleanPRO first and wait several hours spreader or by hand, directly on the water surface, before adding any other products. from shore or from a properly equipped boat.

– Re-treat areas if re-growth begins to appear.

SPOT TREATMENT: Allow 48 hours between consecutive treatments.

Apply GreenCleanPRO directly over algae covered

– In regions where water freezes in the winter, treat-area. Retreat when heavy growth occurs.

ment with GreenCleanPRO (including skimming) 6-8 weeks before expected freeze will help prevent

LIQUID:

masses of decaying algae under the ice cover.

Make a solution with GreenCleanPRO (refer to liquid

– After application, do not allow undiluted granapplication rates). Spray this solution on the water ules/tablets to remain in an area where humans surface from shore or a properly equipped boat. If or animals are exposed.

using a slurry, agitate constantly.

-Non-target plants will suffer contact burn if undiluted granules/tablets are accidentally spilled INJECTION:on them. Do not apply in such a way that the Make a solution with GreenCleanPRO (refer to liquid concentrated product comes in contact with grass, application rates). Inject this solution into the water ornamentals and other foliage.

via a piping system.

–Do not tank mix with aquatic herbicides or algaecides containing copper or bromides. Always SUBSURFACE:apply GreenCleanPRO at least one day prior to Place GreenCleanPRO in burlap bags and drag the application of these products.

through the water by means of a boat. Use granu

– 100 pounds of GreenCleanPRO per million lar/tablets application rates. Begin treatment along gallons of water = 4ppm of sodium.

the shoreline, and proceed outward. The path of the

– Wait 24 hours before treating lagoons with boat shall insure an even distribution. Continue drag-beneficial bacteria.

ging until all GreenCleanPRO is dissolved.

EFFECTIVENESS FACTORS

AERIAL:

-Effects of GreenCleanPRO treatment are immedi-Apply directly to water surface using conventional ately apparent (bubbling, bleaching/discoloration aerial application equipment. Avoiding spray drift of algae, floating dead organic matter). at the application site is the responsibility of the

– GreenCleanPRO treatments are successful when applicator. The interactions of many equipment

APPLICATION RATES

Measuring GREENCLEANPRO

One pound of granules is equivalent to one pound of tablets.

Ground/Surface Rates:

and weather-related factors determine the potential for spray drift. The applicator and the grower are responsible for considering all these factors when making decisions.

SURFACE TREATMENT

Use GreenCleanPRO on all listed non-painted surfaces, to prevent and control algae, bacteria, plant pathogens, moss, fungus, liverwort, molds, slime molds and their spores, and the odors and conditions that these organisms cause.

Use on surfaces, equipment, and structures such as: greenhouse/nursery walkways, ground cloth, weed mats, floors, walls, on and under greenhouse benches, fan blades, watering systems, vats, tanks, coolers, storage rooms, bins, elevators, storage areas, spray equipment, conveyors, irrigation systems, process equipment, process water systems, trucks, structures and related equipment. Use in areas that promote slippery conditions and slip hazards caused by algae and slime molds.

FOR SURFACES, EQUIPMENT AND STRUCTURES:

Use GreenCleanPRO at a rate of 0.5 lb. to 2 lbs. per 1000 square feet of area to be treated. Apply as a granular/tablets, liquid or foam, following Application Instructions below.

POTS, FLATS, TRAYS AND CUTTING TOOLS: Use GreenCleanPRO to suppress / control the spread of plant pathogens, bacteria, fungi and slime forming algae. Use ¼ lb. of GreenCleanPRO per gallon of clean water. Spray equipment thoroughly or soak tools to ensure complete coverage.

BENCHES AND WORK AREAS: Sweep and remove all plant debris. Use a power sprayer to wash all surfaces to remove loose dirt. Use ¼ lb. of GreenCleanPRO per gallon of clean water. Apply as a spray or foam ensuring complete coverage. Scrub to remove heavy growths of algae and fungi.

DUMPSTER AND TRASH CAN TREATMENT: Use GreenCleanPRO to suppress/control odor-causing bacteria in dumpsters and trash cans. Sprinkle 1/81/4 lb. of GreenCleanPRO per 125 sq. ft. of surface area into the bottom of empty dumpster. Make applications over a damp surface or moisten with water immediately following application.

	HEAVY ALGAE GROWTH	LOW ALGAE GROWTH / MAINTENANCE
GRANULAR/ TABLETS:	1-2 pounds of GreenCleanPRO per 1,000 square feet of area.	0.5-1 pounds of GreenCleanPRO per 1,000 square feet of area.
	(1 lb. = 2 cups)	(1 lb. = 2 cups)
	Make granular/tablets applications over a wet surface or activate with water immediately following application.
LIQUID:	Solution Preparation:	(3 tsp. = 1 Tbs.)
	Due to solubility limitations, it is necessary to use at least 1 gallon of water to fully dissolve each 0.5 pounds of GreenCleanPRO.

3

Animal Bedding and Litter Rates for Livestock Barns, Stalls and Holding Pens:

Application Via Foot Mats, Foot Pads, Walk Through Trays: